Redline Gen4 Eleminator - 5.0 turn sensored brushless motor (Red 13.0mm rotor)

Manufacturer: Tekin

Part No: TT2758


Tekin’s GEN4 Lineup introduces the Eliminator purpose built Drag Racing motor, engineered for award-winning performance. Utilizing Oversized Ultra Torque rotors and the best materials available, we designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.

The GEN4 motor line is a completely new ground-up design. We put in the design and test time so you can reduce your lap times. The new stator is precision stamped and pressed, increasing efficiency and reducing resistance. Our motors are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and re-buildable, the new GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.

Input Voltage: 1-2S LiPO - 2.5T / 3.5T / 4.0T / 4.5T / 5.0T

Weight: 5.1oz / 145g

Shaft Dimensions: 3.18mm (1/8") x 15.3mm

Motor Diameter: 35.85mm / 1.40"

Motor Length: 50.25mm / 1.978"
Max Operating Temperature: 180°F / 82°C

Bearing Dimensions: Front: 4x13x5mm

                                     Rear: 1/8x3/8x5/32"

Rotor Size: 13mm TORQUE RED - 3.5T / 4.0T / 4.5T / 5.0T
                    13.5mm ULTRA TORQUE YELLOW - 2.5T

Rebuildable: Yes




 1:10 2WD No Prep
 1:10 2WD Street Eliminator
 1:10 2WD Street Outlaw

 1:10 2WD Pro Stock

 1:10 2WD Pro Mod

 1:10 2WD Top Fuel



 60 Degrees Adjustable Timing Advance
 Drag Racing Specific Design
 CNC Machined 6061-T6 Billet Aluminum Heat Sink Can

 ULTRA TORQUE Neodymium Sintered Magnet

 Precision Engineered for Maximum Energy Conversion

 High Purity Copper Windings Maximize Conductivity

 Low Resistance, High Power Solder Tabs

 Sensored System Ready

 Anodized End-bell Plates Maximize corrosion and Wear Resistance

 High RPM Precision Bearings
 Oversized Front Bearing

 Rebuild-able Design

 Solder-less Sensor PCB Replacement
 Legal in Major Race Governing Bodies
 No-Prep RC Legal

Contact Us

X-Factory UK
418 St Albans Road
WD24 6PJ

Telephone: 01923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.