ROC412EP - element proof sensored brushless crawler motor - 2300kv

Manufacturer: Tekin

Part No: TT2623


Tekin's Element Proof ROC412 offers protection from the elements, giving you the power to take on the trails or track without fear of water, mud or snow! Designed for heavier trail or rock racing rigs, the ROC412 delivers more torque and more power on demand.  Using a 4-pole 12-slot motor design, the ROC412 harnesses the benefits of brushless efficiency and extreme amounts of torque to stay on the trail longer with more power. Couple the ROC412 with an RX4 in larger rigs or RS GEN2 in lighter scale rigs for the smoothest brushless crawling system available. Rock Racing power and Crawling precision are at your disposal.

Recommended Applications:

ROCK CRAWLING & SCALE TRAIL                 

﷯ 1:10 4WD 2.2 Shafty
﷯ 1:10 4WD 2.2 MOA Comp
﷯ 1:10 4WD 2.2 Rock Race
﷯ 1:10 4WD 1.9 Rock Race
﷯ 1:10 4WD Trail



 Input Voltage:  2S - 5700kV / 4600kV / 3100kV

                         3S - 3100kV / 2300kV / 1800kV
                         4S - 2300kV / 1800kV / 1200kV
                         5S - 1800kV / 1200kV / 500kV
                         6S - 1200kV / 500kV
Weight: 180g / 6.3oz
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.8mm / 1.41"
Motor Length: 52.5mm / 2.10"
Bearing Dimensions: Front: 5 x 14 x 5mm / Rear: 5 x 11 x 5mm
Rotor Size: 18.5mm
Rebuildable: Yes



﷯ Element Proof design tackles Water, Mud and Snow*

﷯ 18.5mm Rotor provides more Torque and Braking Power

﷯ 4 Pole 12 Slot Hi-torque Motor Design

﷯ CNC Machined 6061-T6 Billet Aluminum Heatsink Can

﷯ Crawler, Rock Race and Trail Rig Specific

﷯ Neodymium Sintered Magnets

﷯ Rebuildable Design

﷯ High Purity Copper Windings Maximizes Efficiency

﷯ Precision Engineered for Maximum Energy Conversion

﷯ Dual-Plug Sensor Wire Harness for use with all sensored and sensorless systems

﷯ High RPM ABEC5 Oversized Bearings

* Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.

** The ROC412 EP is not intended for operation while submerged in liquid.

*** Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.

Contact Us

X-Factory UK
418 St Albans Road
WD24 6PJ

Telephone: 01923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.