X6-S '16 Spec - carbon fibre shaft drive mid motor conversion kit - Level 1

Manufacturer: DMS Partz

Part No: DMS200

£109.99
Description

The wait is over....... Introducing the X6-S 2wd shaft driven off road buggy conversion from X-Factory UK.

The X6-S has been designed for today’s ultra high traction Astroturf and Carpet type tracks. Featuring a motor position further forward than traditional mid motored cars for better stability and a sharper response..... 

The X6-S is based on the popular X-Factory X6 Cubed front end but utilises the rear suspension and drive train from the trusted B44.2 platform. Featuring a lightweight “CarbonFlex” chassis for both rigid construction and strength whilst retaining the all important controlled flex for consistent bump handling. Carbon fibre multi-layer front top deck system combined with a new carbon fibre rear top deck designed to optimise flex and provide easy access for slipper adjustment. 

Designed to use “shorty” type LIPO batteries, resulting in a superb weight balance both front to rear and left to right.

Two servo mounting positions and rear mounting locations for added ballast to enable easy weight distribution tuning.

Antenna mounting locations on both the left and right of the car to suit multiple receiver positioning. 

The X6-S is a conversion kit and is available in two versions – Level 1 and Level 2. 

The X6-S Level 1 kit will include the parts required for someone who already owns an X-Factory X6 Cubed, leaving them to source only the B44.2 rear end and centre drive parts required to complete their model. The Level 1 conversion includes the  “CarbonFlex” main lower chassis, front carbon fibre side decks, front carbon fibre upper top deck, rear carbon fibre flex top deck, carbon fibre battery strap, X6-S logo vinyl pre-cut decal sheet, set up sheets and instructions. 

The X6-S Level 2 kit is aimed at a racer who does not already own an X6 Cubed and includes everything from the Level 1 kit, as well as the following items; Graphite molded nose piece – Alloy front top deck supports – Carbon Fibre nose bridge spacers and stiffeners – Plastic wing mounts (X-Factory) – Carbon Fibre 4mm “multi mount” rear shock tower* – Alloy chassis top deck posts – Alloy battery posts – Carbon Fibre antenna mount – Alloy top deck spacers – Clear lexan bodyshell and wing with window masks (AE Parts not included in either kit) 

* “Multi Mount” rear shock tower features multiple wing mount positions to accommodate mounts from X-Factory, Associated (B44), Schumacher or JConcepts (C4.2 or B44)

The Multi Mount rear tower is included in the Level 2 kit and will be available shortly as a spare part as well as for all Level 1 owners.

 

 ** New Updated 2016 Spec **

Now includes "Plus10" chassis set (10mm longer chassis, rear top deck and weight adjustable battery strap) not shown in pictures

The new longer 10mm chassis has proved in testing to be more consistent on bumpy tracks, resulting in a more stable car

(The Plus10 chassis requires the longer (AS9672) rear centre CVA dogbone)

Contact Us

X-Factory UK
418 St Albans Road
Watford
Hertfordshire
WD24 6PJ

Telephone: 01923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.