Super Duty - 3.5mm Titanium turnbuckle kit - 7 pcs (Associated B74)

Manufacturer: Lunsford

Part No: L12025

£35.99
Description
 
If you run on high bite clay, AstroTurf or carpet, we highly recommend running 3.5mm SUPER DUTY Turnbuckles. Additionally, the turnbuckle sizes below are different than stock lengths to better suite different adjustment settings and proper turnbuckle to ball cup engagement. 

3.5mm SUPER DUTY Titanium Turnbuckles   
     3.5mm SUPER DUTY Turnbuckles greatly increase the strength over the standard 3mm turnbuckles. We've spent years adapting this concepts to a variety of 1:10 products and have found this is needed for today's high bite, high speed carpet, astroturf and high traction clay surfaces. 
     Making room in the plastic is necessary and achieved by the included drill bit. Plastic integrity is not lost as we maintain zero voids between the turnbuckle threads and plastic rod ends. 
     The turnbuckles included are for stock configuration turnbuckle placement. In some instances, you may need to purchases additional sizes to adapt to all turnbuckle placement options. However, we have found the manufactures and racers tend to lean towards set-ups that stay within the limits of the stock lengths.

The Lunsford Turnbuckle Touch:
- Grade 5 Titanium is roughly a 45% weight savings over steel. 
- Anti-corrosion properties are greater than stainless steel. 
- Nano accurate thread rolling process 
     - A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium.
     - From raw material to the finished product, all of our Grade 5 titanium born and bred in the USA.
- Designed, developed and crafted right here in Albany, Oregon USA at the Lunsford compound.
- All Lunsford Titanium Turnbuckles come with a 100% Guarantee!

     - In the rare instance your turnbuckle bends or breaks, we will replace it for free. Our Guarantee.

Total Weight of Turnbuckles:
11.9 grams

What's Included: (The turnbuckle sizes below are different than stock lengths to better suit different adjustment settings and proper turnbuckle to ball cup engagement.)
1 - 3mm x 35mm PUNISHER Titanium Turnbuckle (Drag Link)
2 - 3.5mm x 42mm SUPER DUTY Titanium Turnbuckles (Steering)
2 - 3.5mm x 44mm SUPER DUTY Titanium Turnbuckles (Front Camber)
2 - 3.5mm x 46mm SUPER DUTY Titanium Turnbuckles (Rear Camber)
1 - 1/8" Drill Bit

Note from Kelly:
Rod End Resize: Increase the inner diameter your rod ends with the supplied 1/8" drill bit. A small cordless drill works best on a slow speed. Use a paper clip or similar item to first measure the depth of the threaded area of the rod end. Use that measurement to mark the drill bit or use a pinion gear to set the depth of the drill bit to ensure you do not drill beyond the existing depth of the rod end.

Contact Us

X-Factory UK
418 St Albans Road
Watford
Hertfordshire
WD24 6PJ

Telephone: 01923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.