Avid Black alloy wider rear C arm mount - minus 2 degree (Associated B7 or B7D)

Manufacturer: Avid R/C

Part No: AV10135-BK

£14.99
Description

The Avid AE B7 -2° C Arm Mount was first innovated by us for the B6.3 and has turned into a must-have if you are racing on high bite surfaces such as carpet or turf. This mount frees up the vehicle in the turns and when landing jumps sideways such as corner tabletops. Typically, to get to the low rear toe settings that you need on carpet, you have to start narrowing the pills through the D Mount which is increasing side bite by decreasing your trackwidth. Our C Arm mount prevents that from happening by widening the C pivot block, thus starting you at 1 deg of rear toe with centered pills on the C and D mount instead of 3. You will be amazed at how well your car handles with less rear toe done in the correct fashion.

Details

  • Removes 2 degrees of rear toe without removing trackwidth.
  • Frees up the car up in turns and when landing jumps sideways such as corner tabletops.
  • HD C mount has material added on the sides with the pill cutouts removed so it retains its strength during impacts.
  • Made with 7075-T6 and anodized black with silver chamfer highlights.
  • Laser-etched Avid logo and -2° on the side for easy identification.

Contact Us

X-Factory UK

Hertfordshire, UK

Telephone: +44 1923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Website: www.xfactoryrc.co.uk

Facebook: www.facebook.com/XFactoryUK

 

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.