Y-Max conversion kit (Yokomo YZ-2)
As used recently at the recent European Championships here at RHR Dirt in the UK and also by Carson Wernimont in testing in the USA
That’s right, it’s here! This is the Factory RC Y-Max Conversion.
The conversion includes a new rear 4mm carbon fibre shock tower and spacer that bolts to the Bmax2 transmission providing the stock YZ-2 shock mount holes as well as an additional set of holes.
Also included are the necessary 2mm shims for the transmission, and waterfall brace.
Factory RC also include a new Y-max Battery strap made entirely from 3mm carbon fibre.
They give you the “factory” treatment and include a bolt on drill template to help you drill straight holes into your Yz2 chassis.
If you have both cars, along with the conversion, you have everything you need.
f you're starting off with only the Yz2 buggy you will need the following parts:
1x B2-300MRF Bmax RF Rear Suspension Mount
1x B2-300RS Rear Suspension spacers
1x B2-302MR Bmax 2 MM Gear Box Case *Optional Hard Case B2-302MRH
1x B2-303T Top Shaft *Optional Aluminum Top Shaft B2-303TA
1x B2-304 Bmax Motor Plate *Optional Lightweight Motor Plate B2-304LW
1x B2-302S 3x35mm Button Head M3 Screws
1x B2-302SM 2x12 Button Head Self tapping screw
4 x ZC-BH312 3x12mm Button Head M3 Screws
1x B2-001 WM Bmax 2 Wing Mounts
1x B2-001 WM 3x40mm Button Head Screw
1x B2-118MR Waterfall support mount
4x ZC-BH310 3x10 Button Head M3 Screws
2x ZC-F310 3x10 Flat Head M3 Screws
1x B2-118H Battery Holder Joint Pin
**Note: You may need other assorted shims, screws, bearings and or hardware.