SUPER DUTY 3.5mm titanium turnbuckle kit (Associated B6.1 or B6.1D)
- Always and only domestic Grade 5 (Ti-6Al-4V) Titanium.
- Nano accurate threading process.
- A very smooth, zero tolerance and bur free threading process aids in the preservation of the parts you are threading into.
- Machined from Made in the USA center-less ground titanium
- Manufactured right here in Albany, Oregon USA at the Lunsford compound.
- Our products are 100% USA sourced, produced, designed and developed.
- All Lunsford Titanium Turnbuckles come with a 100% Guarantee!
- In the rare instance your turnbuckle bends or breaks, we will replace it for free*
What's Included:
4 - 3.5mm x 48mm Titanium Turnbuckles (Rear/Front Camber)
2 - 3.5mm x 51mm Titanium Turnbuckles (Steering)
1 - 1/8" Drill Bit
1 - Super Cool Lunsford Decal
Total Weight of Turnbuckles:
11.2 grams
Note from Kelly:
Rod End Resize: Increase the inner diameter your rod ends with the supplied 1/8" drill bit. A small cordless drill works best on a slow speed. Use a paper clip or similar item to first measure the depth of the threaded area of the rod end. Use that measurement to mark the drill bit to ensure you do not drill beyond the existing depth of the rod end.