6mm x 10mm x 3mm flanged metal sealed ball bearingRevolution 10mm x 15mm x 4mm shielded bearings (4 pieces)

Open 5mm x 10mm x 3mm bearings - not for clutch use (4 pieces)

Back to: Ballraces
Manufacturer: Avid R/C

Part No: AV-MR105/B3

£3.69
Description

NOTICE: This is not the 5x10x4 bearing normally used in clutches. The 5x10x3 Halo series of bearings are a high quality steel/chrome bearing with no shields. These bearings have been tested and proven by many racers. Check your manual for the correct size for your vehicle if you are not certain.

 
 

Bearing Dimensions

 
  • METRIC: 5mm (Inner) x 10mm (Outer) x 3mm (Width)
  • STANDARD: 0.19685" (Inner) x 0.3937" (Outer) x 0.11811" (Width)

Contact Us

X-Factory UK

Hertfordshire, UK

Telephone: +44 1923 816636

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Website: www.xfactoryrc.co.uk

Facebook: www.facebook.com/XFactoryUK

 

Office Hours

Mon to Wed : 10am - 5.30pm
Thursday : 10am - 7pm
Friday : 10am - 5.30pm
Sat & Sun : CLOSED 

Public Bank Holidays : CLOSED

Please note we do not supply direct to the public. Our full range of products are available via any of our UK dealers whom can be found in our dealer locator at the top of the website.