R1 Wurks - Titanium Upper screw set - button head - 62 pcs (Xray XB2'24)
R1WURKS Fits Xray XB2 2024 Titanium upper Screw Set
This 62-piece set replaces the upper steel button head screws with ultra lightweight, high quality Grade 5 (6Al-4V) titanium screws. This set will lower the CG of your vehicle with a weight reduction of approximately 15.2 grams.
Features and Specifications:
- In-house ultra-high precision swiss machining
- High-strength grade 5 (Ti-6Al-4V) titight tolerance hex broaching
- Cold-formed threads for improved grain structure and increased material hardness
- Ultra lightweight head design
- Reduced center of gravity
- This screw set removes approximately 15.2g of weight.
Kit Includes:
M3x6mm Button Head Screws (4pcs)
M3x8mm Button Head Screws (10pcs)
M3x10mm Button Head Screw (10pcs)
M3x12mm Button Head Screws (17pcs)
M3x14mm Button Head Screw (2pcs)
M3x16mm Button Head Screws (9pcs)
M3x22mm Button Head Screws (4pcs)
M3x24mm Button Head Screws (2pcs)
M3x12mm Countersunk Screws (4pcs)
Where Used:
Please refer to the manufacturer's manual for details on where each screw is used, with corresponding page numbers and steps provided below.
M3x6mm Button Head Screws (4pcs)
- x2 – Steering rack Page 24
- x2 – Motor mount Page 39
M3x8mm Button Head Screws (10pcs)
- x2 Front bulkhead – Page 24
- x4 Steering block extensions – Page 26
- x4 Servo mount – Page 34
M3x10mm Button Head Screw (10pcs)
- x2 Diff case – Page 13
- x2 Rear shock tower – Page 17
- x4 Wing mount – Page 17
- x2 Rear upper brace – Page 37
M3x12mm Button Head Screws (17pcs)
- x3 Transmission case – Page 12
- x4 Rear hub link mounts – Page 19
- x2 Steering rack – Page 23
- x4 Front steering blocks – Page 27
- x2 Front Sway bar mount – Page 35
- x2 Front upper deck – Page 35
M3x14mm Button Head Screw (2pcs)
- x2 Lower shock mount – Page 37
M3x16mm Button Head Screws (9pcs)
- x2 Rear shock tower – Page 17
- x2 Rear Ballstud mount – Page 20
- x2 Front topdeck – Page 35
- x1 Rear upper brace – Page 37
- x2 Fan mount – Page 42
M3x22mm Button Head Screws (4pcs)
- x4 Front shock upper and lower – Page 36
M3x24mm Button Head Screws (2pcs)
- x2 Battery posts – Page 40
M3x12mm Countersunk Screws (4pcs)
- x4 Front shock tower – Page 7
These screws are precision broached to ensure the tightest fit with hex tools. However, this fit is only as reliable as the tools used. For lasting hex-to-tool engagement, always use sharp, precision tool tips made from high-speed steel.