UnStickz-It – tyre glue debonder – brush cap bottle

Our UnStickz-It Tyre Glue Cyanoacrylate Debonder is used to clean areas of uncured adhesive and remove small areas of cured material. Over time it will soften thick portions of the cured material. That can be applied to materials such as metal, plastic, wood, glass and rubber. UnStickz-It is also suitable for debonding skin but should not be used to de-bond eyelids or lips.

• Debonder liquid for Cyanoacrylate removal
• Supplied in easy to apply brush cap bottles
• Will remove uncured and cured adhesive

Directions

For Bonded Material

1. Apply to glue line and leave for 30 seconds. Repeat if necessary.
2. Wipe away excess with a clean cloth.

For Bonded Skin

1. Apply to glue line and leave for 30 seconds. Repeat if necessary.
2. Wash immediately after with warm soapy water and apply moisturising cream if necessary.
Caution: Do not use to de-bond eyelids or lips. Do not use on broken or sensitive skin.

Available Sizes: 20g bottle with brush cap.

Also available in our range is the following;

• DMS410 – Stickz-It Pro tyre glue (20g)
• DMS411 – Stickz-It Pro tyre glue Xtra-Large (50g)
• DMS412 – Stiffenz-It Pro tyre sidewall glue (20g)
• DMS413 – UnStickz-It tyre glue debonder (20g)
• DMS414 – Setz-It tyre glue activator aerosol (200ml)
• DMS415 – Setz-It tyre glue activator pump action bottle (50ml)
• DMS416 – Lockz-It blue medium strength threadlock (10ml)

Easy to  follow colour coded labels to help identify which one you need from your pit box at a glance – Stickz-It (Yellow), Stiffenz-It (Purple), UnStickz-It (Green), Setz-It (Red) and Lockz-It (Blue – of course)