Machined 13mm pistons – 2.0mm thick – 2 x 1.8mm- 1 pr (Associated FT 13mm shocks)

Product Overview

The AV10106 machined 13mm pistons for the new AE 13mm shocks are the thinner 2.0mm style, and the AV10107 are the thicker 2.5mm style. They offer a conventional setup but with a perfectly machined round piston and square 90° edges for a tight-fitting piston that has little blow-by creating more pack on jumps. The AE piston has a slightly rounded outer edge and the holes are chamfered which results in harder landings. Over the years here at Avid, we have developed a process of keeping all the edges sharp with little to no burrs to keep your confidence high when landing big jumps.

Piston Tips

A square 90° angle on the piston edge and holes is one of the most overlooked advantages of a machined piston. Our pistons have very sharp edges and sometimes this leaves a small amount of flashing that can easily be removed with your fingernail. Do NOT use a nail file or anything abrasive.

Piston Features

-AV10106 – Fits the new 13mm shocks for Team Associated (13mm bore, 2.5mm shaft hole, 2.0mm thick).

-AV10107 – Fits the new 13mm shocks for Team Associated (13mm bore, 2.5mm shaft hole, 2.5mm thick).

-Machined perfectly round with square 90° edges for a tighter fit to the bore of the shock body for less blow-by creating more pack on jumps.

-The 2.0mm thickness allows the piston to be smoother in bumps but at the cost of bottoming out on big jumps, for those use our 2.5mm thick pistons.

-Has a single dimple if you want to add a small 1.0mm bleeder hole to give the car more bite on slow corners (Blank pistons include 4 dimples.)

-Each package includes 2 pistons inside of a Doodad container printed with AVID logo.